ALL4RC [44460 Hitec HPP-21 Plus PC & Field Programmer(벌크)]

HPP-21 Plus Digital Programmer 및 서보 테스터는 당신의 PC에서 또는 R/C현장에서 하이텍 디지털 서보 프로그램을 설정할 수 있습니다.
프로그램 다운로드 :http://hitecrcd.co.kr/tester/tester.htm

Features

PC and Field Programmer for Hitec Digital Servos

Digital Servo Field/PC Programmer and Tester

Programs all Hitec Digital Servo Parameters

Tests all Brands of Servos

Free Downloadable Software

USB PC Connection

Less Expensive Alternative to HFP-20
rograms all Hitec Digital Servo xpensive Alternative to HFP-20

HPP-21 interface device
- One User’s Manual
The latest version of the software for the HPP-21 is available on the HITEC Website at (www.hitecrcd.com)
*The HPP-21 requires an external power source in order to test/program a servo.
HITEC recommends a standard 4.8V receiver battery, however a 6V pack may be used for servos rated at 6V.
WARNING: Be sure to use a fully-charged battery to prevent any data loss or damage during the programming
process
1. Download and install the HPP-21 program software from www.hitecrcd.com. The HPP-21 software is
compatible with Windows XP and VISTA.
2. Use the appropriate USB Cable (sold separately) to plug the HPP-21 into your PC.
3. Start the HPP-21 software from your PC.
4. Plug an appropriate receiver battery pack (4.8V 4 cell or 6V 5 cell battery) into the HPP-21 ‘Batt’ slot.
5. A servo must be plugged into slot S1 or S2 in order to program or to test. The HPP-21 supports two slots
for servo testing, however it will only program one servo at a time using either slot S1 or S2.

별매품
- One Universal 5 pin mini-USB Cable for PC connection (less then 3ft. recommended). Available at most
office supply sores
- One 4.8V or 6V “receiver” battery*.